Specifications

RoamAbout Mobility System Software Command Line Reference 22-9
show snoop info
Showstheconfiguredsnoopfilters.
Syntax
show snoop filter-name
Defaults
None.
Mode
Enabled.
Example
Thefollowingcommandshowsthesnoopfiltersconfiguredintheexamplesabove:
RBT-8100# show snoop info
snoop1:
observer 10.10.30.2 snap-length 100
all packets
snoop2:
observer 10.10.30.3 snap-length 100
frame-type eq data
mac-pair (aa:bb:cc:dd:ee:ff, 11:22:33:44:55:66)
Related Commands
• clearsnooponpage 22‐2
• setsnooponpage 22‐4
filter‐name Nameofthesnoopfilter.