Specifications

22-6 Snoop Commands
set snoop map
MapsasnoopfiltertoaradioonaDAP.Asnoopfilterdoestakeeffectuntilyoumapittoaradio
andenablethefilter.
Syntax
set snoop map filter-name dap dap-num radio {1 | 2}
Defaults
Snoopfiltersareunmappedbydefault.
Mode
Enabled.
Usage
Youcanmapthesamefiltertomorethanoneradio.Youcanmapuptoeightfilterstothesame
radio.Ifmorethanonefilterhas thesameobserver ,theDAPsendsonlyonecopyofapacketthat
matchesafiltertotheobserver.Afterthefirstmatch,
theDAPsendsthepacketandstops
comparingthepacketagainstotherfiltersforthesameobserver.
Ifthefilterdoesnothaveanobserver,theDAPstillmaintainsacounterofthenumberofpackets
thatmatchthefilter.(Seeshowsnoopstatsonpage 22‐11.)
Example
Thefollowingcommandmapssnoopfiltersnoop1toradio2onDAP3:
RBT-8100# set snoop map snoop1 dap 3 radio 2
success: change accepted.
Related Commands
• clearsnoopmaponpage 22‐3
• setsnooponpage 22‐4
• setsnoopmodeonpage 22‐7
• showsnoopmaponpage 22‐10
• showsnoopstatsonpage 22‐11
filter‐name Nameofthesnoopfilter.
dapdap‐num NumberofaDAPtowhichtomapthesnoopfilter.
radio1 Radio
1oftheDAP.
radio2 Radio2oftheDAP.(Thisoptiondoesnotapplytosingle‐radiomodels.)