Specifications

RoamAbout Mobility System Software Command Line Reference 21-7
set trace dot1x
Traces802.1Xsessions.
Syntax
set trace dot1x [mac-addr mac-address] [port port-num] [user username]
[level level]
Parameters
Defaults
Thedefaulttracelevelis5.
Mode
Enabled.
Example
Thefollowingcommandstartsatraceforthe802.1XsessionsforMACaddress00:01:02 :03:04:05:
RBT-8100# set trace dot1x mac-addr 00:01:02:03:04:05:
success: change accepted.
Related Commands
• cleartraceonpage 21‐3
• showtraceonpage 21‐9
mac‐addrmac‐address TracesaMACaddress.SpecifyaMACaddress,usingcolonsto
separatetheoctets(forexample,00:11:22:aa:bb:cc).
portport‐num Tracesaportnumber.SpecifyaRoamAboutswitchportnumber
between1and22.
userusername Tracesa
user.Specif yausernameofupto80 alphanumeric
characterswithnospaces.
levellevel Determinesthequantityofinformationincludedintheoutput.
Youcansetthelevelwithanintegerfrom1to10,wherelevel10
providesthemostinformation.Levels 1through5provideuser‐
readableinformation.Ifyoudo
notspecifyalevel,level 5isthe
default.