Specifications

21-6 Trace Commands
set trace authorization
Tracesauthorizationinformation.
Syntax
set trace authorization [mac-addr mac-address] [port port-num] [user username]
[level level]
Parameters
Defaults
Thedefaulttracelevelis5.
Mode
Enabled.
Example
ThefollowingcommandstartsatraceforinformationforauthorizationforMACaddress
00:01:02:03:04:05:
RBT-8100# set trace authorization mac-addr 00:01:02:03:04:05
success: change accepted.
Related Commands
• cleartraceonpage 21‐3
• showtraceonpage 21‐9
mac‐addrmac‐address TracesaMACaddress.SpecifyaMACaddress,usingcolonsto
separatetheoctets(forexample,00:11:22:aa:bb:cc).
portport‐num Tracesaportnumber.SpecifyaRoamAboutswitchportnumber
between1and22.
userusername Tracesa
user.Specif yausernameofupto80 alphanumeric
characterswithnospaces.
levellevel Determinesthequantityofinformationincludedintheoutput.
Youcansetthelevelwithanintegerfrom1to10,wherelevel10
providesthemostinformation.Levels 1through5provideuser‐
readableinformation.Ifyoudo
notspecifyalevel,level 5isthe
default.