Specifications

RoamAbout Mobility System Software Command Line Reference 21-5
set trace authentication
Tracesauthenticationinformation.
Syntax
set trace authentication [mac-addr mac-address] [port port-num] [user username]
[level level]
Parameters
Defaults
Thedefaulttracelevelis5.
Mode
Enabled.
Example
Thefollowingcommandstartsatraceforinformationaboutuserjose’sauthentication:
RBT-8100# set trace authentication user jose
success: change accepted.
Related Commands
cleartraceonpage 213
showtraceonpage 219
macaddrmacaddress TracesaMACaddress.SpecifyaMACaddress,usingcolonsto
separatetheoctets(forexample,00:11:22:aa:bb:cc).
portportnum Tracesaportnumber.SpecifyaRoamAboutswitchportnumber
between1and22.
userusername Tracesa
user.Specif yausernameofupto32 alphanumeric
characterswithnospaces.
levellevel Determinesthequantityofinformationincludedintheoutput.
Youcansetthelevelwithanintegerfrom1to10,wherelevel10
providesthemostinformation.Levels1through5provideuser
readableinformation.Ifyou
donotspecifyalevel,level5isthe
default.