Specifications

RoamAbout Mobility System Software Command Line Reference 21-3
clear trace
Deletesrunningtracecommandsandendstraceprocesses.
Syntax
clear trace {trace-area | all}
Parameters
Defaults
None.
Mode
Enabled.
Example
Toclearalltraceprocesses,typethefollowingcommand:
RBT-8100# clear trace all
success: clear trace all
Toclearthesessionmanagertrace,typethefollowingcommand:
RBT-8100# clear trace sm
success: clear trace sm
Related Commands
• settraceauthenticationonpage 21‐5
• settraceauthorizationonpage 21‐6
• settracedot1xonpage 21‐7
• settracesmonpage 21‐8
• showtraceonpage 21‐9
trace‐area Endsaparticulartraceprocess.Specifyoneofthefollowingkeywordstoendthe
tracesdocumentedinthischapter:
• authorization—Ends
anauthorizationtrace
• dot1x—Endsan802.1Xtrace
• authentication—Endsanauthenticationtrace
• sm—Endsasessionmanagertrace
all Endsalltraceprocesses.