Specifications

20-24 File Management Commands
show boot
Displaysthesystemimageandconfigurationfilenames usedafterthelastrebootandconfigured
foruseafterthenextreboot .
Syntax
show boot
Parameters
None.
Defaults
None.
Mode
Access.
Example
ThefollowingcommandshowsthebootinformationforaRoamAboutswitch:
RBT-8100# show boot
Configured boot image: boot0:RBT020003.020
Configured boot configuration: file:newconfig
Booted version: 2.0.3
Booted image: boot1:RBT020101.020
Booted configuration: file:configuration
Product model: RBT-8100
Table 20‐2describesthefieldsintheoutput.
Table 20-2 Output for show boot
Output What It Displays...
Configured boot image Boot partition and image filename MSS will use to boot next time the software is
rebooted.
Configured boot
configuration
Configuration filename MSS will use to boot next time the software is rebooted.
Booted version Software version the switch is running.
Booted image Boot partition and image filename MSS used the last time the software was
rebooted. MSS is running this software image.
Booted configuration Configuration filename MSS used to load the configuration the last time the
software was rebooted.