Specifications

20-22 File Management Commands
set boot image
ChangesthesoftwareimagetoloadafterrebootingaRoamA boutswitchrunningMSSVersion
1.0.
Syntax
set boot image filename
Parameters
Defaults
None.
Mode
Enabled.
Example
Thefollowingcommandsetsthebootimageto1_0_upgrade_RBT010101.020:
RBT-8100# set boot image 1_0_upgrade_RBT010101.020
success: Setting image. Check "show boot" for status
Related Commands
• setbootconfiguration‐fileonpage 20‐21
• showbootonpage 20‐24
Note: This command applies only when upgrading from MSS Version 1.0 to 1.1. The command is
deprecated in 1.1.
filename Filename.Specifybetween1and128alphanumericcharacters,withno
spaces.