Specifications

RoamAbout Mobility System Software Command Line Reference 20-13
md5
CalculatestheMD5checksumforafileintheswitch’snonvolatilestorage.
Syntax
md5 [boot0: | boot1:]filename
Parameters
Defaults
None.
Mode
Enabled.
Example
Youmustincludethebootpartitionnameinfrontofthefilename.Ifyouspecifyonlythefilename,
theCLIdisplaysamessagestatingthatthefiledoesnotexist.
ThefollowingcommandcalculatesthechecksumforimagefileRBT040003.020inbootpartition0:
RBT-8100# md5 boot0:RBT040003.020
MD5 (boot0:RBT040003.020) = b9cf7f527f74608e50c70e8fb896392a
boot0:|boot1: Bootpartitionintowhichyoucopiedthefile.
filename Nameofthefile.