Specifications

RoamAbout Mobility System Software Command Line Reference 19-23
show rfdetect data
Displaysinformationaboutthe APsdetectedbyaRo amAboutswitch.
DisplaysalltheBSSIDsdetectedbyan individualRoamAboutswitchduringanRFdetectionscan.
ThedataincludesBSSIDstransmittedbyotherEnterasys Networksradiosaswellasbythird‐
partyaccesspoints.
Syntax
show rfdetect data
Defaults
None.
Mode
Enabled.
Usage
YoucanenterthiscommandonanyRoamAboutswitchintheMobilityDomain.Theoutput
appliesonlytotheswitchonwhichyouenterthecommand.Todisplayalldevicesthataspecific
Enterasys Networksradiohasdetected,eveniftheradioismanagedbyanotherRoamAbout
switch,usetheshowrfdetect
visiblecommand.
TodisplayrogueinformationfortheentireMobilityDomain,usetheshowrfdetectmobility‐
domaincommandontheseedswitch.
OnlyoneMACaddressislistedforeachEnterasys Networksradio,eveniftheradioisbeaconing
multipleSSIDs.
Examples
ThefollowingcommandshowsthedevicesdetectedbythisRoamAboutswitchduringthemost
recentRFdetectionscan:
RBT-8100# show rfdetect data
Total number of entries: 197
Flags: i = infrastructure, a = ad-hoc
c = CCMP, t = TKIP, 1 = 104-bit WEP, 4 = 40-bit WEP, w = WEP(non-WPA)
BSSID Vendor Type Port/Radio/Ch Flags RSSI Age SSID
----------------- ------- ----- ------------- ------ ---- --- -----------------
00:07:50:d5:cc:91 Cisco intfr 3/1/6 i----w -61 6 r27-cisco1200-2
00:07:50:d5:dc:78 Cisco intfr 3/1/6 i----w -82 6 r116-cisco1200-2
00:09:b7:7b:8a:54 Cisco intfr 3/1/2 i----- -57 6
00:0a:5e:4b:4a:c0 3Com intfr 3/1/11 i----- -57 6 public
00:0a:5e:4b:4a:c2 3Com intfr 3/1/11 i-t1-- -86 6 enterasyswlan
00:0a:5e:4b:4a:c4 3Com intfr 3/1/11 ic---- -85 6 ets-ccmp
00:0a:5e:4b:4a:c6 3Com intfr 3/1/11 i-t--- -85 6 ets-tkip
00:0a:5e:4b:4a:c8 3Com intfr 3/1/11 i----w -83 6 ets-voip
00:0a:5e:4b:4a:ca 3Com intfr 3/1/11 i----- -85 6 ets-webaaa
...