Specifications

RoamAbout Mobility System Software Command Line Reference 19-21
show rfdetect countermeasures
DisplaysthecurrentstatusofcountermeasuresagainstroguesintheMobilityDomain.
Syntax
show rfdetect countermeasures
Parameters
None.
Defaults
None.
Mode
Enabled.
Usage
ThiscommandisvalidonlyontheseedswitchoftheMobilityDomain.
Examples
ThefollowingexampledisplayscountermeasuresstatusfortheMobilityDomain:
RBT-8100# show rfdetect countermeasures
Total number of entries: 190
Rogue MAC Type Countermeasures RBT-IPaddr Port/Radio
Radio Mac /Channel
----------------- ----- ------------------ --------------- -------------
00:0b:0e:00:71:c0 intfr 00:0b:0e:44:55:66 10.1.1.23 dap 4/1/6
00:0b:0e:03:00:80 rogue 00:0b:0e:11:22:33 10.1.1.23 dap 2/1/11
Table 19‐3describesthefieldsinthisdisplay.
Table 19-3 show rfdetect countermeasures Output
Output What it displays...
Rogue MAC BSSID of the rogue.
Type Classification of the rogue device:
• rogue—Wireless device that is on the network but is not supposed to be
on the network.
• intfr—Wireless device that is not part of your network and is not a rogue,
but might be causing RF interference with access point radios.
• known—Device that is a legitimate member of the network.
Countermeasures Radio
MAC
MAC address of the Enterasys Networks radio sending countermeasures
against the rogue.
RAS-IPaddr System IP address of the RoamAbout switch that is managing the access
point that is sending or will send countermeasures.