Specifications

19-18 RF Detection Commands
show rfdetect clients
DisplaysthewirelessclientsdetectedbyaRoamAboutswitch.
Syntax
show rfdetect clients [mac mac-addr]
Parameters
Defaults
None.
Mode
Enabled.
Examples
ThefollowingcommandshowsinformationaboutallwirelessclientsdetectedbyaRoamAbout
switch’saccesspoints:
RBT-8100# show rfdetect clients
Total number of entries: 30
Client MAC Client AP MAC AP Port/Radio NoL Type Last
Vendor Vendor /Channel seen
----------------- ------- ----------------- ------- ------------- --- ----- ----
00:03:7f:bf:16:70 Unknown Unknown dap 1/1/6 1 intfr 207
00:04:23:77:e6:e5 Intel Unknown dap 1/1/2 1 intfr 155
00:05:5d:79:ce:0f D-Link Unknown dap 1/1/149 1 intfr 87
00:05:5d:7e:96:a7 D-Link Unknown dap 1/1/149 1 intfr 117
00:05:5d:7e:96:ce D-Link Unknown dap 1/1/157 1 intfr 162
00:05:5d:84:d1:c5 D-Link Unknown dap 1/1/1 1 intfr 52
Thefollowingcommanddisplaysmoredetailsaboutaspecificclient:
RBT-8100# show rfdetect clients mac 00:0c:41:63:fd:6d
Client Mac Address: 00:0c:41:63:fd:6d, Vendor: Linksys
Port: dap 1, Radio: 1, Channel: 11, RSSI: -82, Rate: 2, Last Seen (secs ago):
84
Bssid: 00:0b:0e:01:02:00, Vendor: Enterasys Networks, Type: intfr, Dst:
ff:ff:ff:ff:ff:ff
Last Rogue Status Check (secs ago): 3
Thefirstlinelistsinformationfortheclient.Theotherlineslistinformationaboutthemostrecent
802.11packetdetectedfromtheclient.
Table 19‐1andTable 19‐2describethefieldsinthesedisplays.
macmac‐addr Displaysdetailedinformationforaspecific client.