Specifications

RoamAbout Mobility System Software Command Line Reference 19-15
set rfdetect vendor-list
Addsanentrytothepermittedvendorlist.Thepermittedvendorlistspecifiesthethird‐partyAP
orclientvendors thatareallowedonthenetwork.MSSdoesnotlistadeviceasarogueor
interferingdeviceifthedevice’sOUIisinthepermittedvendorlist.
Syntax
set rfdetect vendor-list {client | ap} mac-addr
Parameters
Defaults
Thepermittedvendorlistisemptybydefaultandallvendorsareallowed.However,afteryou
addanentrytothelist,MSSallowsonlythedeviceswhoseOUIsareonthelist.
Mode
Enabled.
Usage
ThepermittedvendorlistappliesonlytotheRoamAboutswitchonwhichthelistisconfigured.
RoamAboutswitchesdonotsharepermittedvendorlists.
Example
ThefollowingcommandaddsanentryforclientswhoseMACaddressesstartwithaa:bb:cc:
RBT-8100# set rfdetect vendor-list client aa:bb:cc:00:00:00
success: MAC aa:bb:cc:00:00:00 is now in client vendor-list.
Thetrailing00:00:00valueisrequired.
Related Commands
• clearrfdetectvendor‐listonpage 19‐8
• showrfdetectvendor‐listonpage 19‐31
client|ap SpecifieswhethertheentryisforanAPbrandoraclientbrand.
mac‐addr|all OrganizationallyUniqueIdentifier(OUI)toremove.