Specifications

19-14 RF Detection Commands
set rfdetect ssid-list
AddsanSSIDtothepermittedSSIDlist.ThepermittedSSIDlistspecifiestheSSIDsthatare
allowedonthenetwork.IfMSSdetectspacketsforanSSIDthatisnotonthelist,theAPthatsent
thepacketsisclassifiedasarogue.MSSissuescountermeasuresagainsttherogueif
theyare
enabled.
Syntax
set rfdetect ssid-list ssid-name
Parameters
Defaults
ThepermittedSSIDlistisemptybydefaultandallSSIDsareallowed.However,afteryouaddan
entrytothelist,MSSallowstrafficonlyfortheSSIDsthatareonthelist.
Mode
Enabled.
Usage
ThepermittedSSIDlistappliesonlytotheRoamAboutswitchonwhichthelistisconfigured.
RoamAboutswitchesdonotsharepermittedSSIDlists.
Example
ThefollowingcommandaddsSSIDmycorptothelistofpermittedSSIDs:
RBT-8100# set rfdetect ssid-list mycorp
success: ssid mycorp is now in ssid-list.
Related Commands
• clearrfdetectssid‐listonpage 19‐7
• showrfdetectssid‐listonpage 19‐30
ssid‐name SSIDnameyouwanttoaddtothepermittedSSIDlist.