Specifications

19-12 RF Detection Commands
set rfdetect log
Disablesorreenablesgenerationoflogmessageswhenroguesaredetectedorwhenthey
disappear.
Syntax
set rfdetect log {enable | disable}
Parameters
Defaults
RFdetectionloggingisenabledbydefault.
Mode
Enabled.
Usage
ThiscommandisvalidonlyontheseedswitchoftheMobilityDomain.
Thelogmessagesforroguesaregeneratedonlyontheseedandappearonlyintheseed’slog
messagebuffer.Usetheshowlogbuffercommandtodisplaythemessagesintheseedswitch’s
logmessagebuffer.
Example
ThefollowingcommandenablesRFdetectionloggingfortheMobilityDomainmanagedbythis
seedswitch:
RBT-8100# set rfdetect log enable
success: rfdetect logging is enabled.
Related Commands
showlogbufferonpage 23‐7
enable Enablesloggingofrogues.
disable Disablesloggingofrogues.