Specifications

RoamAbout Mobility System Software Command Line Reference 19-11
set rfdetect ignore
ConfiguresalistofknowndevicestoignoreduringanRFscan.MSSdoesnotgeneratelog
messagesortrapsforthedevicesintheignorelist.
Syntax
set rfdetect ignore mac-addr
Parameters
Defaults
MSSreportsallnon‐Enterasys NetworksBSSIDsdetectedduringanRFscan.
Mode
Enabled.
Usage
Usethiscommandtoidentifythird‐partyAPsandotherdevicesyouarealreadyawareofanddo
notwantMSStoreportfollowingRFscans.
Ifyoutrytoinitiatecountermeasuresagainstadeviceontheignorelist,theignorelisttakes
precedenceandMSSdoesnotissuethecountermeasures.
Countermeasuresapplyonlytorogue
devices.
fyouaddadevicethatMSShasclassifiedasaroguetothepermittedvendorlistorpermitted
SSIDlist,butnottotheignorelist,MSScanstillclassifythedeviceasarogue.Adding anentryto
thepermittedvendorlistor
permittedSSIDlistmerelyindicate sthatthedeviceisfromanallowed 
manufacturerorisusinganallowedSSID.However,tocauseMSStostop classifyingthedeviceas
arogue,youmustaddthedevice’sMACaddresstotheignorelist
Example
ThefollowingcommandconfiguresMSStoignoreBSSIDaa:bb:cc:11:22:33duringRFscans:
RBT-8100# set rfdetect ignore aa:bb:cc:11:22:33
success: MAC aa:bb:cc:11:22:33 is now ignored.
Related Commands
• clearrfdetectignoreonpage 19‐6
• showrfdetectignoreonpage 19‐25
mac‐addr BSSID(MACaddress)ofthedevicetoignore.