Specifications

19-10 RF Detection Commands
set rfdetect black-list
Addsanentrytotheclientblacklist.Theclientblacklistspecifiesclientsthatarenotallowedon
thenetwork.MSSdropsallpacketsfromtheclientsontheblacklist.
Syntax
set rfdetect black-list mac-addr
Parameters
Defaults
Theclientblacklistisemptybydefault.
Mode
Enabled.
Usage
Inadditiontomanuallyconfiguredentries,thelistcancontainentriesaddedbyMSS.MSScan
placeaclientintheblacklistduetoanassociation, reassociationordisassociationfloodfromthe
client.
TheclientblacklistappliesonlytotheRoamAboutswitchonwhichthelistisconfigured.
RoamAbout
switchesdonotshareclientblacklists.
Example
ThefollowingcommandaddsclientMACaddress11:22:33:44:55:66totheblacklist:
RBT-8100# set rfdetect black-list 11:22:33:44:55:66
success: MAC 11:22:33:44:55:66 is now blacklisted.
Related Commands
• setrfdetectblack‐listonpage 19‐10
• showrfdetectblack‐listonpage 19‐17
mac‐addr MACaddressyouwanttoplaceontheblacklist.