Specifications

RoamAbout Mobility System Software Command Line Reference 19-9
set rfdetect attack-list
Addsanentrytotheattacklist.TheattacklistspecifiestheMACaddressesofdevicesthatMSS
shouldissuecountermeasuresagainstwheneverthedevicesaredetectedonthenetwork.The
attacklistcancontaintheMACaddressesofAPsandclients.
Syntax
set rfdetect attack-list mac-addr
Parameters
Defaults
Theattacklistisemptybydefault.
Mode
Enabled.
Usage
TheattacklistappliesonlytotheRoamAboutswitchonwhichthelistisconfigured.RoamAbout
switchesdonotshareattacklists.
Example
ThefollowingcommandaddsMACaddressaa:bb:cc:44:55:66tothea ttacklist:
RBT-8100# set rfdetect attack-list 11:22:33:44:55:66
success: MAC 11:22:33:44:55:66 is now in attacklist.
Related Commands
• clearrfdetectattack‐listonpage 19‐3
• showrfdetectattack‐listonpage 19‐16
mac-addr MAC address you want to attack.