Specifications

RoamAbout Mobility System Software Command Line Reference 18-11
State Status of the session:
• AUTH, ASSOC REQ—Client is being associated by the 802.1X protocol.
• AUTH AND ASSOC—Client is being associated by the 802.1X protocol, and the user is
being authenticated.
• AUTHORIZING—User has been authenticated (for example, by the 802.1X protocol and
an AAA method), and is entering AAA authorization.
• AUTHORIZED—User has been authorized by an AAA method.
• ACTIVE—User’s AAA attributes have been applied, and the user is active on the
network.
• DEASSOCIATED—One of the following:
Wireless client has sent the RoamAbout switch a disassociate message.
User associated with one of the current RoamAbout switch’s access points has
appeared at another RoamAbout switch in the Mobility Domain.
• ROAMING AWAY—The RoamAbout switch has been sent a request to transfer the user,
who is roaming, to another RoamAbout switch .
• STATUS UPDATED—RoamAbout switch is receiving a final update from an Access
Point about the user, who has roamed away.
• WEB_AUTHING—User is being authenticated by WebAAA.
• WIRED AUTH’ING—User is being authenticated by the 802.1X protocol on a wired
authentication port.
• KILLING—User’s session is being cleared, because of 802.1X authentication failure,
entry of a clear command, or some other event.
now on IP address and port and radio numbers of the session’s current RoamAbout switch , the
MAC address of the Access Point, and the last update time.
from IP address and port and radio numbers of the session’s previous RoamAbout switch , the
MAC address of the Access Point, and the last update time. Up to six roaming events are
tracked in this display.
Host name Host name of the user’s networking device.
Table 18-4 Output for Additional show sessions network verbose (continued)
Output What It Displays...