Specifications

17-24 802.1X Management Commands
set dot1x wep-rekey
EnablesordisablesWiredEquiva lencyPrivacy(WEP)rekeyingforbroadcastandmulticast
encryptionkeys.
Syntax
set dot1X wep-rekey {enable | disable}
Parameters
Defaults
WEPkeyrotationisenabled,bydefault.
Mode
Enabled.
Usage
ReauthenticationisnotrequiredforWEPkeyrotationtotakeplace.Broadcastandmulticastkeys
arealwaysrotatedatthesametime,soallmembersofagivenradio,VLAN,orencryptiontype
receivethenewkeysatthesametime.
Example
TypethefollowingcommandtodisableWEPkeyrotation:
RBT-8100# set dot1x wep-rekey disable
success: wep rekeying disabled
Related Commands
• setdot1xwep‐rekey‐periodonpage 17‐25
• showdot1xonpage 17‐26
enable CausesthebroadcastandmulticastkeysforWEPtoberotatedatan
intervalsetbythesetdot1xwep‐rekey‐periodforeachradio,associated
VLAN,andencryptiontype.TheRoamAboutswitchgeneratesthenew
broadcast
andmulticastkeysandpushesthekeystotheclientsviaEAPoL
keymessages.
disable WEPbroadcastandmulticastkeysareneverrotated.