Specifications

RoamAbout Mobility System Software Command Line Reference 17-23
set dot1x tx-period
SetsthenumberofsecondsthatmustelapsebeforetheRoamAboutswitchretransmitsanEAPoL
packet.
Syntax
set dot1x tx-period seconds
Parameters
Defaults
Thedefaultis5 s econds.
Mode
Enabled.
Example
TypethefollowingcommandtosetthenumberofsecondsbeforetheRoamAboutswitch
retransmitsanEAPoLpacketto300:
RBT-8100# set dot1x tx-period 300
success: dot1x tx-period set to 300.
Related Commands
• cleardot1xtx‐periodonpage 17‐11
• showdot1xonpage 17‐26
seconds Specifyavaluebetween1and65,535.