Specifications

RoamAbout Mobility System Software Command Line Reference 17-15
set dot1x max-req
SetsthemaximumnumberoftimestheRoamAboutswitchretransmitsanEAPrequesttoa
supplicant(client)beforeendingtheauthenticationsession.
Syntax
set dot1x max-req number-of-retransmissions
Parameters
Defaults
ThedefaultnumberofEAPretransmissionsis2.
Mode
Enabled.
Usage
TosupportSSIDsthathaveboth802.1XandstaticWEPclients,MSSsendsamaximumoftwoID
requests,evenifthisparameterissettoahighervalue.Sett ingtheparametertoahighervalue
doesaffectallothertypesofEAPmessages.
Example
TypethefollowingcommandtosetthemaximumnumberofEAPrequestretransmissionstothree
attempts:
RBT-8100# set dot1x max-req 3
success: dot1x max request set to 3.
Related Commands
• cleardot1xmax‐reqonpage 17 ‐4
• showdot1xonpage 17‐26
number‐of‐retransmissions Specifyavaluebetween0and10.