Specifications

17-14 802.1X Management Commands
set dot1x key-tx
Enablesordisablesthetransm issionofencryptionkeyinformationtothesupplicant(cl ient)in
EAPoverLAN(EAPoL)keymessages,afterauthenticationissuccessful.
Syntax
set dot1x key-tx {enable | disable}
Parameters
Defaults
Keytransmissionisenabledbydefault.
Mode
Enabled.
Example
Typethefollowingcommandtoenablekey transmission:
RBT-8100# set dot1x key-tx enable
success: dot1x key transmission enabled.
Related Commands
showdot1xonpage 17‐26
enable Enablestransmissionofencryptionkeyinformationtoclients.
disable Disablestransmissionofencryptionkeyinformationtoclients.