Specifications

RoamAbout Mobility System Software Command Line Reference 17-13
set dot1x bonded-period
ChangestheBondedAuth™(bondedauthentication)period.TheBondedAuthperiodisthe
numberofsecondsMSSallowsaBondedAuthusertoreauthenticate.
Syntax
set dot1x bonded-period seconds
Parameters
Defaults
Thedefaultbondedperiodis0seconds,whichdisablesthefeature. 
Mode
Enabled.
Usage
Normally,theBondedAuthperiodneedstobesetonlyifthenetworkhasBondedAuthclients
thatusedynamicWEP,oruseWEP‐40orWEP‐104encryptionwithWPAorRSN.Theseclients
canbeaffectedbythe 802.1XreauthenticationparameterortheRADIUSSession‐Timeout
parameter.
Example
Tosetthebondedauthenticationperiodto60seconds,typethefollowingcommand:
RBT-8100# set dot1x bonded-period 60
success: change accepted.
Related Commands
• cleardot1xbonded‐periodonpage 17‐3
• showdot1xonpage 17‐26
seconds NumberofsecondsMSSretainssessioninformationforanauthenticated
machinewhilewaitingforaclientto(re)authenticateonthesamemachine.
Youcanchangethebondedauthenticationperiodtoavaluefrom1to300
seconds.