Specifications

17-12 802.1X Management Commands
set dot1x authcontrol
Providesagl obaloverridemechanismfor802.1Xauthenticationconfigurationonwired
authenticationports.
Syntax
set dot1x authcontrol {enable | disable}
Parameters
Defaults
Bydefault,authenticationcontrolforindividualwiredauthenticationisenabled.
Mode
Enabled.
Usage
Thiscommandappliesonlytowiredauthenticationports.
Example
Toenableper‐port802.1Xauthenticationonwiredauthenticationports,typethefollowing
command:
RBT-8100# set dot1x authcontrol enable
success: dot1x authcontrol enabled.
Related Commands
• setdot1xport‐controlonpage 17‐16
• showdot1xonpage 17‐26
enable Allowsallwiredauthenticationportsrunning 802.1Xtousethe
authenticationspecifiedperportbythesetdot1Xport‐controlcommand.
disable Forcesallwiredauthenticationportsrunning802.1X tounconditionally
acceptall802.1XauthenticationattemptswithanEAP
Successmessage
(ForceAuth).