Specifications

RoamAbout Mobility System Software Command Line Reference 17-11
clear dot1x tx-period
ResetstothedefaultsettingthenumberofsecondsthatmustelapsebeforetheRoamAboutswitch
retransmitsanEAPoverLAN(EAPoL)packet.
Syntax
clear dot1x tx-period
Parameters
None.
Defaults
Thedefaultis5 s econds.
Mode
Enabled.
Example
TypethefollowingcommandtoresettheEAPoLretransmissiontime:
RBT-8100# clear dot1x tx-period
success: change accepted.
Related Commands
• setdot1xtx‐periodonpage 17‐23
• showdot1xonpage 17‐26