Specifications

17-10 802.1X Management Commands
clear dot1x timeout supplicant
ResetstothedefaultsettingthenumberofsecondsthatmustelapsebeforetheRoamAboutswitch
timesoutanauthenticationsessionwithasupplicant(client).
Syntax
clear dot1x timeout supplicant
Parameters
None.
Defaults
Thedefaultfortheauthenticationtimeoutsessionsis30 seconds.
Mode
Enabled.
Example
Typethefollowingcommandtoresetthetimeoutperiodforanauthenticationsession:
RBT-8100# clear dot1x timeout supplicant
success: change accepted.
Related Commands
• setdot1xtimeoutsupplicantonpage 17‐22
• showdot1xonpage 17‐26