Specifications

RoamAbout Mobility System Software Command Line Reference 17-9
clear dot1x timeout auth-server
ResetstothedefaultsettingthenumberofsecondsthatmustelapsebeforetheRoamAboutswitch
timesoutarequesttoaRADIUS server.
Syntax
clear dot1x timeout auth-server
Parameters
None.
Defaults
Thedefaultis30 seconds.
Mode
Enabled.
Example
Toresetthedefaulttimeoutforrequeststoanauthenticationserver,typethefollowingcommand:
RBT-8100# clear dot1x timeout auth-server
success: change accepted.
Related Commands
• setdot1xtimeoutauth‐serveronpage 17‐21
• showdot1xonpage 17‐26