Specifications

3-22 System Services Commands
set system name
ChangesthenameoftheRoamAboutswitchfromthedefaultsystemnameandalsoprovides
contentfortheCLIprompt,ifyoudonotspecifyaprompt.
Syntax
set system name string
Parameters
Defaults
Bydefault,thesystemnameandcommandprompthavethesamevalue.Thefactorydefaultfor
bothisRBT‐mm‐nnnnnn,wheremmisthemodelnumberandnnnnnnisthelast6 digitsofthe
12‐digitsystemMACaddress.
Mode
Enabled.
Usage
Enteringsetsystemnamewithnostringresetsthesystemnametothe factorydefault.
Toviewthesystemnamestring,typetheshowsystemcommand.
Example
ThefollowingexamplesetsthesystemnametoanamethatidentifiestheRoamAboutswitch:
RBT-8100# set system name RBT-bldg3
success: change accepted.
RBT-bldg3#
Related Commands
• clearsystemonpage 3‐5
• setpromptonpage 3‐14
• setsystemcontactonpage 3 ‐15
• setsystemlocationonpage 3‐21
• showsystemonpage 3‐26
string Alphanumericstringupto256 characterslong,withnoblankspaces.R o amAbout
SwitchManagerrequiresuniqueRoamAboutswitchnames.