Specifications

RoamAbout Mobility System Software Command Line Reference 17-5
clear dot1x port-control
ResetsallwiredauthenticationportsontheRoamAboutswitchtodefault802.1Xa uthentication.
Syntax
cleardot1xport‐control
Defaults
Bydefault,allwiredauthenticationportsaresettoautoandtheyprocessauthenticationrequests
asdeterminedbythesetauthenticationdot1Xcommand.
Mode
Enabled.
Usage
Thiscommandisoverriddenbythesetdot1xauthcontrolcommand.Thecleardot1xport‐control
commandreturnsportcontroltothemethodconfigured.Thiscommandappliesonlytowired
authenticationports.
Example
Typethefollowingcommandtoresetthewiredauthenticationportcontrol:
RBT-8100# clear dot1x port-control
success: change accepted.
Related Commands
• setdot1xport‐controlonpage 17‐16
• showdot1xonpage 17‐26