Specifications

RoamAbout Mobility System Software Command Line Reference 17-3
clear dot1x bonded-period
ResetstheBondedAuthperiodtoitsdefaultvalue.
Syntax
clear dot1x max-req
Parameters
None.
Defaults
Thedefaultbondedauthenticationperiodis0seconds.
Mode
Enabled.
Example
ToresettheBondedperiodtoitsdefault,typethefollowingcommand:
RBT-8100# clear dot1x bonded-period
success: change accepted.
Related Commands
• setdot1xbonded‐periodonpage 17‐13
• showdot1xonpage 17‐26