Specifications

RoamAbout Mobility System Software Command Line Reference 17-1
17
802.1X Management Commands
Use802.IEEEXmanagementcommandstomodifythedefaultsettingsforIEEE802.1Xsessions
onaRAS.Forbestresults,changethesettingsonlyifyouareawareofaproblemwiththe
RoamAboutswitch’s802.1Xperformance.
Thischapterpresents802.1Xcommandsalphabetically.Usethefollowingtabletolocate
commands
inthischapter.Forinformationaboutconfiguring802.1Xcommandsforuser
authentication,seeChapter 8,AAACommands.
Caution: 802.1X parameter settings are global for all SSIDs configured on the switch.
For information about...
Refer to page...
clear dot1x bonded-period 17-3
clear dot1x max-req 17-4
clear dot1x port-control 17-5
clear dot1x quiet-period 17-6
clear dot1x reauth-max 17-7
clear dot1x reauth-period 17-8
clear dot1x timeout auth-server 17-9
clear dot1x timeout supplicant 17-10
clear dot1x tx-period 17-11
set dot1x authcontrol 17-12
set dot1x bonded-period 17-13
set dot1x key-tx 17-14
set dot1x max-req 17-15
set dot1x port-control 17-16
set dot1x quiet-period 17-17
set dot1x reauth 17-18
set dot1x reauth-max 17-19
set dot1x reauth-period 17-20
set dot1x timeout auth-server 17-21