Specifications

16-16 RADIUS and Server Groups Commands
set server group
ConfiguresagroupofonetofourRADIUS servers.
Syntax
set server group group-name members server-name1 [server-name2] [server-name3]
[server-name4]
Parameters
Defaults
None.
Mode
Enabled.
Usage
Youmustassignallgroupmemberssimultaneously,asshownintheexample.Toenableload
balancing,usesetservergroupload‐balanceenable.
DonotusethesamenameforaRADIUSserverandaRADIUSservergroup.
Example
Tosetservergroupshorebirdswithmembersheron,egret,andsandpiper,typethefollowing
command:
RBT-8100# set server group shorebirds members heron egret sandpiper
success: change accepted.
Related Commands
• clearservergrouponpage 16‐8
• setservergroupload‐balanceonpage 16‐17
• showaaaonpage 8‐62
group‐name Servergroupnameofupto32characters,withnospacesortabs.
membersserver‐
name1
server‐name2
server‐name3
server‐name4
ThenamesofoneormoreconfiguredRADIUSservers.Youcan
enterupto
fourservernames.