Specifications

RoamAbout Mobility System Software Command Line Reference 16-15
Defaults
Defaultvaluesarelistedbelow:
• auth‐port—UDPport 1812
• acct‐port—UDPport 1813
• timeout—5 seconds
• retransmit—3(thetotalnumberofattempts,includingthefirstattempt)
• deadtime—0(zero)minutes(TheRoamAboutswitchdoesnotdesignateunresponsive
RADIUSserversasunavailable.)
• key—Nokey
• encrypted‐key—Nokey
• author‐password—nopassword
Mode
Enabled.
Usage
ForagivenRADIUSserver,thefirstinstanceofthiscommandmustsetboththeservernameand
theIP addressandcanincludeanyoralloftheotheroptionalparameters.Subsequentinstancesof
thiscommandcanbeusedtosetoptionalparametersforagivenRADIUSserver.
Toconfigure
theserverasaremoteauthenticatorfortheRoamAboutswitch,youmustaddittoa
servergroupwiththesetservergroupcommand.
DonotusethesamenameforaRADIUSserverandaRADIUSservergroup.
Example
TosetaRADIUSservernamedRS42with IPaddress198.162.1.1tousethedefaultaccountingand
authorizationportswithatimeoutintervalof30 seconds,twotransmitattempts,5minutesof
deadtime,akeystringofkeys4u,andthedefaultauthorizationpasswordofnopassword ,type the
followingcommand:
RBT-8100# set radius server RS42 address 198.162.1.1 timeout 30 retransmit 2
deadtime 5 key keys4U
Related Commands
• setauthenticationadminonpage 8‐27
• setauthenticationconsoleonpage 8‐29
• setauthenticationdot1xonpage 8‐31
• clearauthenticationmaconpage 8‐7
• setauthenticationwebonpage 8‐38
• setradiusonpage 16‐9
• setservergrouponpage 16 ‐16
• showaaaonpage 8‐62