Specifications

RoamAbout Mobility System Software Command Line Reference 16-13
set radius proxy port
ConfigurestheRoamAboutswitchportconnectedtoathird‐partyAPasaRADIUSproxyforthe
SSIDsupportedbytheAP.
Syntax
set radius proxy port port-list [tag tag-value] ssid ssid-name
Parameters
Defaults
None.
Mode
Enabled.
Usage
AAAforthird‐partyAPusershasadditionalconfigurationrequirements.Seethe“Configuring
AAAforUsersofThird‐PartyAPs”sectioninthe“ConfiguringAAAforNetworkUsers”chapter
oftheRoamAboutMobilitySystem SoftwareConfigurationGuide.
EnteraseparatecommandforeachSSID,anditstagvalue,youwantthe
RoamAboutswitchto
support.
Example
ThefollowingcommandmapsSSIDmycorptopacketsreceivedonport3or4,using802.1Qtag
value104:
RBT-8100# set radius proxy port 3-4 tag 104 ssid mycorp
success: change accepted.
Related Commands
• clearradiusproxyportonpage 16‐6
• clearauthenticationproxyonpage 8‐8
• setradiusproxyclientonpage 16‐12
portport‐list RoamAboutswitchport(s)connectedtothethird‐partyAP.
tagtag‐value 802.1Qtagvalueinpacketssentbythethird‐partyAPfortheSSID.
ssidssid‐name SSID
supportedbythethird‐partyAP.