Specifications

16-12 RADIUS and Server Groups Commands
set radius proxy client
AddsaRADIUSproxyentryforathird‐partyAP.TheproxyentryspecifiestheIPaddressofthe
APandtheUDPportonwhichtheRoamAboutswitchlistensforRADIUStrafficfromtheAP.
Syntax
set radius proxy client address ip-address [port udp-port-number] key string
Parameters
Defaults
ThedefaultUDPportnumberis1812.
Mode
Enabled.
Usage
AAAforthird‐partyAPusershasadditionalconfigurationrequirements.Seethe“Configuring
AAAforUsersofThird‐PartyAPs”sectioninthe“ConfiguringAAAforNetworkUsers”chapter
oftheEnterasys NetworksMobilitySystemSoftwareConfigurationGuide.
Example
ThefollowingcommandconfiguresaRADIUSproxyentryforathird‐partyAPRADIUSclientat
10.20.20.9,sendingRADIUStraffictothedefaultUDP port1812ontheRoamA boutswitch:
RBT-8100# set radius proxy client address 10.20.20.9 key radkey1
success: change accepted.
Related Commands
• clearradiusproxyclientonpage 16‐5
• setauthenticationproxyonpage 8‐37
• setradiusproxyportonpage 16‐13
addressip‐address IPaddressofthethird‐partyAP.Entertheaddressindotteddecimal
notation.
portudp‐
port‐number
UDPportonwhichtheRoamAboutswitchlistensforRADIUStraffic
from
theAP.
keystring Password(sharedsecretkey)theRoamAboutswitchusestoauthenticate
andencryptRADIUS communication.