Specifications

16-4 RADIUS and Server Groups Commands
clear radius client system-ip
RemovestheRoamAboutswitch’ssystemIPaddressfromuseasthepermanentsourceaddressin
RADIUSclientrequestsfromtheswitchtoitsRADIUSserver(s).
Syntax
clear radius client system-ip
Parameters
None.
Defaults
None.
Mode
Enabled.
Usage
Theclea rradiusclientsystem‐ipcommandcausestheRoamAboutswitchtousetheIPaddressof
theinterfacethroughwhichitsendsaRADIUSclientrequestasthesourceIPaddress.The
RoamAboutswitchselectsasourceinterfaceaddressbasedoninformationinitsroutingtableas
thesourceaddress
forRADIUSpacketsleavingtheswitch.
Example
ToclearthesystemIPaddressasthepermanentsourceaddressforRADIUSclientrequests,type
thefollowingcommand:
RBT-8100# clear radius client system-ip
success: change accepted.
Related Commands
• setradiusclientsystem‐iponpage 16‐11
• showaaaonpage 8‐62