Specifications

3-20 System Services Commands
set system ip-address
SetsthesystemIPaddresssothatitcanbeusedbyvariousservicesintheRoamAboutswitch.
Syntax
set system ip-address ip-addr
Parameters
Defaults
None.
Mode
Enabled.
Example
ThefollowingcommandsetstheIPaddressoftheRoamAboutswitchto192.168.253.1:
RBT-8100# set system ip-address 192.168.253.1
success: change accepted.
Related Commands
• clearsystemonpage 3‐5
• setinterfaceonpage 7‐24
• showsystemonpage 3‐26
Caution: Any currently configured Mobility Domain operations cease if you change the IP address.
If you change the address, you must reset the Mobility Domain.
ip‐addr IPaddress,indotteddecimalnotation.