Specifications

16-2 RADIUS and Server Groups Commands
clear radius
ResetsparametersthatweregloballyconfiguredforRADIUSserverstotheirdefaultvalues.
Syntax
clear radius {deadtime | key | retransmit | timeout}
Parameters
Defaults
GlobalRADIUSparametershavethefollowingdefaultvalues:
• deadtime—0(zero)minutes(TheRoamAboutswitchdoesnotdesignateunresponsive
RADIUSserversasunavailable.)
• key—Nokey
• retransmit—3(thetotalnumberofattempts,includingthefirstattempt)
• timeout—5seconds
Mode
Enabled.
Usage
TooverridethegloballysetvaluesonaparticularRADIUSserver,usethesetradiusserver
command.
Example
ToresetallglobalRADIUSparameterstotheirfactorydefaults,typethefollowingcommands:
RBT-8100# clear radius deadtime
success: change accepted.
RBT-8100# clear radius key
success: change accepted.
RBT-8100# clear radius retransmit
success: change accepted.
RBT-8100# clear radius timeout
success: change accepted.
deadtime NumberofminutestowaitafterdeclaringanunresponsiveRADIUSserver
unavailablebeforeretryingtheRADIUSserver.
key Password(sharedsecretkey)usedtoauthenticatetotheRADIUSserver.
retransmit Numberoftransmissionattemptsmadebeforedeclaringanunresponsive
RADIUSserverunavailable.
timeout NumberofsecondstowaitfortheRADIUSserverto
respondbefore
retransmitting.