Specifications

14-2 Security ACL Commands
clear security acl
ClearsaspecifiedsecurityACL,anaccesscontrolentry(ACE),orallsecurityACLs,fromtheedit
buffer.Whenusedwiththecommandcommitsecurityacl,clearstheACEfromtherunning
configuration.
Syntax
clear security acl {acl-name | all} [editbuffer-index]
Parameters
Defaults
None.
Mode
Enabled.
Usage
Thiscommand deletessecurityACLsonlyintheeditbuffer.Youmustusethecommitsecurityacl
commandwiththiscommandtodeletetheACLorACEfromtherunningconfigurationand
nonvolatilestorage.
TheclearsecurityaclcommanddeletesasecurityACL,butdoesnotstopitscurrent filtering
function
iftheACLismappedtoanyvirtualLANs(VLANs),ports,orvirtualports,oriftheACL
isappliedinaFilter‐Idattributetoanauthenticateduserorgroupofuserswithcurrentsessions.
Example
ThefollowingcommandsdisplaythecurrentsecurityACLconfiguration,clearacl_133intheedit
buffer,committhedeletiontotherunningconfiguration,andredisplaytheACL configurationto
showthatitnolongercontainsacl_133:
RBT-8100# show security acl info all
ACL information for all
set security acl ip acl_133 (hits #1 0)
---------------------------------------------------------
1. deny IP source IP 192.168.1.6 0.0.0.0 destination IP any
set security acl ip acl_134 (hits #3 0)
---------------------------------------------------------
1. permit IP source IP 192.168.0.1 0.0.0.0 destination IP any enable-hits
set security acl ip acl_135 (hits #2 0)
---------------------------------------------------------
acl‐name NameofanexistingsecurityACLtoclear.ACLnamesstartwithaletter
andarecase‐insensitive.
all ClearsallsecurityACLs.
editbuffer‐index Numberthatindicateswhichaccesscontrolentry(ACE )inthesecurity
ACLtoclear.IfyoudonotspecifyanACE,allACEsareclearedfrom
the
ACL.