Specifications

3-14 System Services Commands
set prompt
ChangestheCLIpromptfortheRoamAboutswitchtoastringyouspecify.
Syntax
set prompt string
Parameters
Defaults
ThefactorydefaultfortheRoamAboutswitchnameisRBT‐mm‐nnnnnn,wheremmisthemodel
numberandnnnnnnisthelast6 digitsofthe12‐digitsystemMACaddress.
Mode
Enabled.
Usage
Whenyoufirstloginfortheinitialconfigurationofthe R o amAboutswitch,theCLIprovidesan
RBT‐mm‐nnnnnn>prompt.Afteryoubecomeenabledbytypingenableandgivingasuitable
password,theRBT‐mm‐nnnnnn#promptisdisplayed.
Ifyouusethesetsystemnamecommandtochange
thedefaultsystemname,MSSusesthatname
intheprompt,unlessyoualsochange thepromptwithsetprompt.
Example
ThefollowingexamplesetsthepromptfromRBT‐8100tohappy_days:
RBT-8100# set prompt happy_days
success: change accepted.
happy_days#
Related Commands
• clearpromptonpage 3‐4
• setsystemnameonpage 3‐22
• showconfigonpage 20‐26
string Alphanumericstringupto32 characterslong.Toincludespacesintheprompt,you
mustenclosethestringindoublequotationmarks(“”).