Specifications

13-16 IGMP Snooping Commands
IGMP message type Received Transmitted Dropped
----------------- -------- ----------- -------
General-Queries 0 0 0
GS-Queries 0 0 0
Report V1 0 0 0
Report V2 5 1 4
Leave 0 0 0
Mrouter-Adv 0 0 0
Mrouter-Term 0 0 0
Mrouter-Sol 50 101 0
DVMRP 4 4 0
PIM V1 0 0 0
PIM V2 0 0 0
Topology notifications: 0
Packets with unknown IGMP type: 0
Packets with bad length: 0
Packets with bad checksum: 0
Packets dropped: 4
Table 13‐1describesthefieldsinthisdisplay.
Table 13-1 Output for show igmp
Output What It Displays...
VLAN VLAN name. MSS displays information separately for each VLAN.
IGMP is enabled (disabled) IGMP state.
Proxy reporting Proxy reporting state.
Mrouter solicitation Multicast router solicitation state.
Querier functionality Pseudo-querier state.
Configuration values (qi) Query interval.
Configuration values (oqi) Other-querier-present interval.
Configuration values (qri) Query response interval.
Configuration values (lmqi) Last member query interval.
Configuration values
(rvalue)
Robustness value.
Multicast router information List of multicast routers and active multicast groups. The fields containing this
information are described separately. The show igmp mrouter command
shows the same information.
Port Number of the physical port through which the RoamAbout switch can reach
the router.
Mrouter-IPaddr IP address of the multicast router interface.
Mrouter-MAC MAC address of the multicast router interface.