Specifications

13-14 IGMP Snooping Commands
set igmp rv
ChangestherobustnessvalueforoneVLANorallVLANsonaRoamAboutswitch.Robustness
adjuststheIGMPtimerstotheamountoftrafficlossthatoccursonthenetwork.
Syntax
set igmp rv num [vlan vlan-id]
Parameters
Defaults
ThedefaultrobustnessvalueforallVLANsis2.
Mode
Enabled.
Example
ThefollowingexamplechangestherobustnessvalueonVLANorangeto4:
RBT-8100# set igmp rv 4 vlan orange
success: change accepted.
Related Commands
• setigmpoqionpage 13‐8
• setigmpqionpage 13‐10
• setigmpqrionpage 13‐11
num Robustnessvalue.Youcanspecifyavaluefrom2through255.Setthe
robustnessvaluehighertoadjustformoretrafficloss.
vlanvlan‐id VLANnameornumber.Ifyoudonot
specifyaVLAN,MSSchangesthe
robustnessvalueforallVLANs.