Specifications

13-12 IGMP Snooping Commands
set igmp querier
EnablesordisablestheIGMPpseudo‐querieronaRoamAboutswitch,ononeVLANorall
VLANs.
Syntax
set igmp querier {enable | disable} [vlan vlan-id]
Parameters
Defaults
Thepseudo‐querierisdisabledonallVLANsbydefault.
Mode
Enabled.
Usage
recommendsthatyouusethepseudo‐querieronlywhentheVLANcontainslocalmu lticasttraffic
sourcesandnomulticastrouterisservicingthesubnet.
Example
Thefollowingexampleenablesthepseudo‐qu erierontheorangeVLAN:
RBT-8100# set igmp querier enable vlan orange
success: change accepted.
Related Commands
showigmpquerieronpage 13‐21
enable Enablesthepseudo‐querier.
disable Disablesthepseudo‐querier.
vlanvlan‐id VLANnameornumber.Ifyoudonotspeci fyaVLAN,thepseudo‐querier
isenabledordisabledonallVLANs.