Specifications

RoamAbout Mobility System Software Command Line Reference 13-7
set igmp mrsol mrsi
Changestheintervalbetweenmulticastroutersolicitati onsbyaRoamAboutswitchononeVLAN
orallVLANs.
Syntax
set igmp mrsol mrsi seconds [vlan vlan-id]
Parameters
Defaults
Theintervalbetweenmulticastroutersolicitationsis30secondsbydefault.
Mode
Enabled.
Example
Thefollowingexamplechangesthemulticastroutersolicitationintervalto60seconds:
RBT-8100# set igmp mrsol mrsi 60
success: change accepted.
Related Commands
setigmpmrsolonpage 13‐6
seconds Numberofsecondsbetweenmulticastroutersolicitations. Youcanspecifya
valuefrom1through65,535.
vlanvlan‐id VLANnameornumber.Ifyoudonotspeci fyaVLAN,MSSchangesthe
multicastroutersolicitationintervalforallVLANs.