Specifications

RoamAbout Mobility System Software Command Line Reference 13-5
set igmp mrouter
AddsorremovesaportinaRoamAboutswitch’slistofportsonwhichitforwardstrafficto
multicastrouters.Staticmulticastportsareimmediatelyaddedtoorremovedfromthelistof
routerportsanddonotageout.
Syntax
set igmp mrouter port port-list {enable | disable}
Parameters
Defaults
Bydefault,noportsarestaticmulticastrouterports.
Mode
Enabled.
Usage
YoucannotaddAPaccessportsorwiredauthenticationportsasstaticmulticastports.However,
MSScandynamicallyaddtheseporttypestothelistofmulticastportsbasedonmulticasttraffic.
Examples
Thefollowingcommandaddsport 9asastaticmulticastrouterport:
RBT-8100# set igmp mrouter port 9 enable
success: change accepted.
Thefollowingcommandremovesport 9fromthestaticmulticastrouterportlist:
RBT-8100# set igmp mrouter port 9 disable
success: change accepted.
Related Commands
showigmpmrouteronpage 13‐19
portport‐list Portlist.MSSaddsorremovesthespecifiedportsinthelistofstatic
multicastrouterports.
enable Addstheporttothelistofstaticmulticastrouterports.
disable Removestheportfromthelistofstaticmulticastrouterports.