Specifications

12-18 STP Commands
set spantree priority
ChangestheSTProotbridgepriorityofaRoamAboutswitchononeorallofitsVLANs.
Syntax
set spantree priority value {all | vlan vlan-id}
Parameters
Defaults
ThedefaultrootbridgepriorityfortheswitchonallVLANsis32,768.
Mode
Enabled.
Example
ThefollowingcommandsetsthebridgepriorityofVLANpinkto69:
RBT-8100# set spantree priority 69 vlan pink
success: change accepted.
Related Commands
showspantreeonpage 12‐20
priorityvalue Priorityvalue.Youcanspecifyavaluefrom0through65,535.Thebridge
withthelowestpriorityvalueiselectedtobetherootbridgeforthe
spanningtree.
all ChangesthebridgepriorityonallVLANs.
vlanvlan‐id VLANnameornumber.MSSchangesthe
bridgepriorityononlythe
specifiedVLAN.