Specifications

RoamAbout Mobility System Software Command Line Reference 12-17
set spantree portvlanpri
ChangesthepriorityofanetworkportorportsforselectionaspartofthepathtotheSTProot
bridge,ononeVLANorallVLANs.
Syntax
set spantree portvlanpri port-list priority value {all | vlan vlan-id}
Parameters
Defaults
ThedefaultSTPpriorityforallnetworkportsis128.
Mode
Enabled.
Example
Thefollowingcommandsetsthepriorityofports3and4to48onVLANmauve:
RBT-8100# set spantree portvlanpri 3-4 priority 48 vlan mauve
success: change accepted.
Related Commands
• clearspantreeportprionpage 12‐3
• clearspantreeportvlanprionpage 12‐5
• setspantreeportprionpage 12‐15
• showspantreeonpage 12‐20
port‐list Listofports.MSSchangesthepriorityonthespecifiedports.
priorityvalue Priorityvalue.Youcanspecifyavaluefrom0(highestpriority)through255
(lowest
priority).
all ChangesthepriorityonallVLANs.
vlanvlan‐id VLANnameornumber.MSSchangesthepriorityononlythespecified
VLAN.