Specifications

12-14 STP Commands
set spantree portfast
EnablesordisablesSTPportfastconvergenceononeormoreportsonaRoamAboutswitch.
Syntax
set spantree portfast port port-list {enable | disable}
Parameters
Defaults
STPportfastconvergenceisdisabledbydefault.
Mode
Enabled.
Usage
Useportfastconvergenceonportsthataredirectlyconnectedtoservers,hosts,orotherMAC
stations.
Example
Thefollowingcommandenablesportfastconvergenceonports9,11,and13:
RBT-8100# set spantree portfast port 9,11,13 enable
success: change accepted.
Related Commands
showspantreeportfastonpage 12‐25
portport‐list Listofports.MSSenablesthefeatureonthespecifiedports.
enable Enablesportfastconvergence.
disable Disablesportfastconvergence.