Specifications

RoamAbout Mobility System Software Command Line Reference 12-9
set spantree fwddelay
ChangestheperiodoftimeafteratopologychangethataRoamAboutswitchwhichisnottheroot
bridgewaitstobeginforwardingLayer2trafficononeorallofitsconfiguredVLANs.(Theroot
bridgealwaysforwardstraffic.)
Syntax
set spantree fwddelay delay {all | vlan vlan-id}
Parameters
Defaults
Thedefaultforwardi ngdelayis15seconds.
Mode
Enabled.
Example
ThefollowingcommandchangestheforwardingdelayonVLANpinkto20 seconds:
RBT-8100# set spantree fwddelay 20 vlan pink
success: change accepted.
Related Commands
showspantreeonpage 12‐20
delay Delayvalue.Youcanspecifyfrom4through30seconds.
all ChangestheforwardingdelayonallVLAN s.
vlanvlan‐id VLANnameornumber.MSSchangestheforwardingdelayononlythe
specifiedVLAN.